Everyone loves baskets, right?...especially those pretty baskets with liners! But they can be so expensive! So I am going to show you how to take the baskets you already have and add liners…the no-sew way!
- a square or rectangular basket
- fabric of your choice (I used natural duck because I liked the little flecks of brown in it. How much you will need will depend on the size of your basket.)
- iron-on hem tape
- jute twine
- measuring tape
- hot glue gun
- scissors
- First, measure your basket using a flexible measuring tape. Start on the outside and measure to allow for the length of the outer edge of the liner (I wanted mine to be three inches).
- Continue down into the inside…
- across the bottom...
- and up the inside of the other side...
- and then end with the outer length on the other side. Take this measurement and add one inch to allow for finishing.
- Then measure the width of that side and add one inch to that measurement.
If you have a basket with different length sides, you will need to repeat the process on the opposite side. That was the case with mine. My second strip was 23 inches by 10 inches. Obviously, your measurements will depend on the size of your basket.
- Press in one-half inch on all four sides of each strip, overlapping at the corners.
- Cut away a little diagonal piece at each corner so that the hem tape will be able to adhere to all sides.
- Cut a piece of the iron-on hem tape and slide it under the fold of the fabric. Follow the directions on the package and press the tape into place. The tape will fuse the fold in place.
- I found that I had to go back after I had finished and give the corners a little diagonal cut to make them look neater.
- You now have two strips with finished edges.
- Measure one half the length of the outer edge of the liner and place a little mark on the inside of the strip with a pencil. The outer edge of my liner is 3 inches, so I marked each side at 1 1/2 inches.
- Place a dot of hot glue at each mark and add a length of jute twine which will serve as the tie. (Ten inches worked well for me). Use a bamboo skewer or toothpick to press the twine into place so that you don’t get burned. Ouch!
- Finally, place one strip in the basket with the finished edge down and then layer the other strip across it diagonally. Tie the edges and then smooth the strips into place inside the basket.
So that's it for my part of the No-Sew Decorating Showcase!
Please be sure to visit these wonderful blogs for some more fabulous NO-SEW PROJECTS!
No-Sew Monogrammed Throw ~ Yvonne at Stone Gable
No-Sew Fashion-Inspired Chair with Fabric Rosettes ~ Amy at Atta Girl Says
No-Sew Changeable Pillow Covers ~ Suzy at Worthing Court
No-Sew Burlap Lavender Sachet ~ Ann at On Sutton Place
Thanks for stopping by! I hope you enjoyed having a little peek at my no-sew basket liners! Please visit these wonderful bloggers and their beautiful blogs to see what they are up to and to find a list of this week’s participants!Under the Table and Dreaming for the Sunday Showcase Party , Thrifty Decor Chick for Before and After Monday , Between Naps on the Porch for Metamorphosis Monday , The Stories of A2Z for Tutorials and Tips Tuesday , Coastal Charm for Nifty Thrifty Tuesday , A Stroll thru Life for Inspire Me Tuesday , My Uncommon Slice of Suburbia for Tuesday's Treasures, The Everyday Home for Home{work} Wednesday , Savvy Southern Style for Wow Us Wednesdays , The Shabby Creek Cottage for Transformation Thursdays , No Minimalist Here for the Open House Party on Thursdays , Stone Gable for Tutorials, Tips and Tidbits on Thursdays , My Romantic Home for Show and Tell Friday , French Country Cottage for Feathered Nest Friday , Common Ground for Be Inspired on Fridays , The Charm of Home for Home Sweet Home Friday , Craftberry Bush for the Inspiration Gallery on Friday , Funky Junk Interiors for Saturday Nite Special, Tatertots and Jello for the Link Party Palooza, The Graphics Fairy for Brag Monday
See you next time! À la prochaine!
Also find me at…
0 comments:
Post a Comment